OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
James Y
> 3 dayOver priced for what it is, but it works fine for my 2010 Mac Pro.
-
aserbant
> 3 dayGreat accessory, but if youre price conscious you should probably buy this directly from OWC. No issues installing multiple SSDs in my 09 Mac Pro.
-
Rob
> 3 dayPurchased this OWC Mount Pro to add an SSD in a mid-2010 Mac Pro 5,1. The two mount screws along the rail work perfectly, the other two aren’t as secure, but since SSDs are so small and lightweight, this seems like a stable enough solution. I think the OWC blue makes it easy to identify which bay the SSD is installed in later. Likely going to order again for additional SSDs in the future.
-
Wing Hong Louie
> 3 dayworks great
-
Joe Brown
Greater than one weekPerfect fit
-
Schmidel McGrödel, Esq.
> 3 dayThis is the best tray for 2.5 drives in a Mac Pro, but consider NVMe SSD for more speed instead.
-
Hans
> 3 dayTook all of 2 minutes to install on my 2010 Mac Pro 5,1.
-
R. J. Crane
Greater than one weekThere’s not much to it, but it does what it’s supposed to do.
-
raman bhardwaj
> 3 dayperfectly fits inside MacPro 5,1 hard disk slots and perfectly holds the OWC SSD hard drive. Its fairly easy to fit the ssd into the mount and just push the mount into the HD slot in Mac pro.
-
Dan Bach
> 3 dayUsed if in my 2012 Mac Pro. I purchased it to mount a full-size hard drive and it lacked the second set of screw holes to mount the drive. I ended up using gaffers tape for stability.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
