TOPGREENER TGWF115PRM Wi-Fi Plug with Energy Monitoring, Smart Outlet, Control Lights and Appliances from Anywhere, No Hub Required, White, Works with Amazon Alexa and Google Assistant - Amazon Vine

I had attached this to an insta-hot water dispenser, first left the smart plug remain on 24/7 for a week to obtain a baseline of my hot water dispensers energy usage, then I set it on a schedule to eliminate 10 hrs out of the day, when I wouldnt be needing my HW dispenser and I saw a ±20% reduction in the energy use, so the energy tracking of this smart plug appears to be working fairly accurately. The insta-HW dispenser has a pretty high energy demand to heat/maintain the water to 180°F, so this smart plug is capable/rated for high wattage devices. Highly recommended!

They work well! I was hoping the app allowed you to see all data over time, so as to look for power spikes, but the data collection appears limited to total kilowatts. Also, there doesnt appear to be a way to reset data collected, like if you want to start monitoring a different device.

Working all over the house with no booster in the router. worked on the fridge till I pushed it back against the wall. Fixed that by plugging it into a power strip on the side of the fridge. Freezer and torch on back porch no problem. Power usage very useful info. Probably need to replace the fridge. I have the app on my phone and tablet. the tablet seems more responsive than the phone when you touch an icon. I have 11 of these in use now. most of them the square ones. two fit in a wall socket. The 10 amp rating has been no issue even on the fridge or freezer.

This product was simple to install with the top Greener app. Was very easy to link to Alexa afterwards with the related skill. It responds quickly to smart commands. I have it running a heater in my bedroom oh, and I was able to make it on an automated timer in case it ever got left on.

I might have too many things on my WiFi, but this worked fine for a few weeks, thenit just shut off and wouldnt come but on. I did the cave man shake, bump and multi button push and it came back on after being unplugged for 15 minutes. Working fine again. We will see.

I love these, I can View energy usage, turn appliances on and off, set schedules and timers.. all from my phone. I can now control appliances at my house like coffee pot, electric blanket, patio and light stringers in a way I couldn’t before. Can now set my coffee pot the night before, and set to turn off my sons entertainment center in the middle of the night every night, he often falls asleep with it on. Definitely makes my home more efficient. Definitely recommend.

I used one on my washing machine and set up a notification to alert me when the power dropped to zero and a load was finished. Works great! Doesnt work real well if you have too many people logged into the app tho, at most two. Super handy and no more forgotten laundry in the washer to grow moldy and stinky!

This TopGreener smart outlet plug helps me remotely power my troublesome furnace OFF and ON from anywhere. My ten year old Bryant high-efficiency furnace has an intermittent problem. When the thermostat calls for heat, the furnace does a startup cycle of running a purge blower, then igniting the burner. The burner doesnt always ignite and the furnace shuts down. To make it try again, the power switch must be turned OFF, then ON. Once in awhile, this has to be done twice. We have had a service tech out three times, but the furnace always behaves when hes here. Last winter, we were overseas, visiting family. I checked our smart thermostat and saw it calling for heat, but the house was dropping below 60 degrees. Several times, our daughter had to go to our house and turn the switch OFF, then ON to reset the furnace. I needed to find a way to do this from anywhere. Smart switches that I found seemed to be intended to control lights and/or didnt have the capacity to run a gas furnace. I needed to find a smart device with a 15 amp capacity. I chose the TopGreener smart outlet rated to operate appliances up to 15 amps. I also wanted to be able to bypass the smart device, just in case there were any problems. The photos show what was done. The smart outlet plugs into a single receptacle that is always powered. The power cord from the smart outlet is connected to the three-way switch. The Common terminal of the three-way switch is connected to the bottom switch to power the furnace. The remaining three-way switch screw connects to the source power. Thus the three-way switch will power the furnace from the smart outlet or constant power. The TopGreener Android app works very well. The only issue I had was trying to initially pair the smart outlet. The paper instruction sheet packed with the smart plug is correct and worked. After set-up, it was easy to rename the smart outlet. It works well with Alexa, but the instructions were a little confusing to me. But I confuse easily. The ultimate test was when I contacted a friend across the ocean in Guam, and asked him to install the app and try to power my furnace ON and OFF. It worked!

Ive owned these for about a year now and theyve been great. Its not the most advanced meter in the world, but the price was right. I did have trouble resetting it. I had to switch the app pairing mode to AP, then press and hold the button for 5 seconds, release (LED should flash rapidly). Then, press and hold for another 5 seconds which will put it in AP mode, the LED should flash slowly. At this point you can connect your phones Wi-Fi to the plug and finish adding it in the app.

It works as described. I randomly turn lights on and off while on vacation. I also monitor energy usage of the two wall air-conditioners i have. I wish it would let me monitor i finer time than hours. But it does what i want.