WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARY
17-12-2024Extremely easy to connect using the push button method (WPS)! Now ALL my devices work in spots that had really low wireless readings...went from 2-5 Bars!!!VERY PLEASED
-
PATRICIA
> 3 dayAwesome, easy set up, instructions were detailed enough for this novice. Increased my poor coverage area from two bars to five bars. YAAAAASet up was less than 10 minutes
-
Charles Heathcote
Greater than one weekalles super
-
KIMBERLY
> 3 dayGreat small unobtrusive gadget that really works. I had very poor wi fi capability on my tablet....configured this and plugged it. Shazaam! I now have connectivity as fast as my desktop anywhere in the house. No more tremendous lag time.I highly highly recommend this. pretty easy to set up. Plugged it in the a wall socket and pressed the wps button on the range extender and on my router. Within a minute they synced and I moved the extender to the kitchen where I needed it. No problems so far.
-
SANDRA
Greater than one weekEasy to set up. Works perfectly for a month now with no issue
-
double
> 3 daywar innerhalb von 24h da und seitdem nutze ich es für mein 100mbit anschluss.
-
SANDRA
Greater than one weekThe entire process took about 10 to 15 minutes.The Extender has an integrated power plug so you dont have to worry about power adapters or where to store the device when it is in use. It just plugs into the wall and is out of the way.
-
BENJAMIN
> 3 dayThe little wifi extender is great. So easy to set-up, instructions are very clear, just follow the steps. Up and running in 3 minutes and best of all, my phone works flawlessly with it. I had researched and really really recommended .
-
Halle McGlynn
> 3 daysehr gut
-
BENJAMIN
> 3 dayDid exactly as specified, extended our routers range by at least another 50 feet as it now reaches my shop. No slow down in speed either. Highly recommended!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
