WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
G. Remrow
> 3 dayDas Kabel ist einwandfrei, mehr kann man ja eigentlich auch nicht von einem Netwerkkabel erwarten als dass es taug hat. Der günstige Preis hat sicher den einen oder anderen misstrauisch gestimmt -mich auch- aber es ist ein wirklich gutes Produkt.
-
CHRISTINE
> 3 dayDid a wonderful job of extending my home Wi-Fi coverage! Setup was a breeze; did not require cables or the packaged CD software.
-
JERRY
> 3 dayAfter carefully following the set up instructions this device worked great. It completely solved my poor reception problem and even increased the range to at least 125 feet outside of my house. This was a very cheap solution to my problem, I highly recommend this product.
-
Trefies
> 3 dayPreis Leistung ist perfekt. Das Kabel ist recht dünn und flexibel. Stecker rastet ordentlich ein und keine Verbindungsprobleme
-
Elizabeth Mathena
> 3 dayThis extender was very easy to setup with our Apple Airport Extreme (which I had heard these types of products sometimes have difficulty getting along with each other). I unboxed and plugged the unit into the wall. Then I used the webpage setup to configure.
-
MARGARET
> 3 dayUsed this to extend the range of a Comcast wireless router. Setup is easy but it assumes your internal network is using 192. Some may need to go in and do some extra configuration for it to work on their network.
-
KIMBERLY
> 3 dayWe plugged the extender into an outlet on our screened patio and there was a very good, strong signal out to where we needed the wifi, which is about 50 feet. Great product for the money and would definitely buy another one.
-
PATRICIA
> 3 dayAmazing does exactly what we needed it for to extend the WiFi for further reach in our basement
-
MARY
Greater than one weekIts a great experince, but when it gets hot it feels like the speed becomes slower. All in all, I recomend it for those who have a large place and the wifi doesnt cover all parts of the house.
-
Udo M
> 3 dayAlles gut
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
