2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
PATRICIA
> 24 hourWorks great. I have two homes next to each other and using a booster it covers both houses.works extremely well - would recommend to anyone looking for an extender.
-
KEITH
> 24 hourSimple range extender that works great. I use it to extend wifi coverage in my gym and it works great. Within its the product categorys limitation (extenders limit throughput), its an excellent value product that gets the job done perfectly. Well built and designed.
-
JERRY
> 24 hourTook minutes to install, and no longer have any dead spots in my home. The wifi receiver is on the second floor, the device in on the 1st. Id say the circular range is at least a 30ft diameter
-
CHRISTINE
> 24 hourPretty pretty easy setup, boosted the signal as advertised. Seems to do the job inside the house. Ill find out in the Spring if it helps in the back yard.I am sure that it works but the problem is that the instructions is written for someone that knows what they are doing. Instructions need to be written so that anyone can follow them.
-
ALBERT
> 24 hourSuper easy to install, works excellent! Highly recommend this product. I was having poor signal from my wifi to my Amazon Stick... now that the extender is installed I have great signal.
-
SANDRA
> 24 hourEasy set up and works great in my house. I bought two of them to cover my entire property, just under 1/4 acre. No more dead spots.
-
DaWe
> 24 hourVerbinde mit dem Kabel mein HD-Receiver zum 42 TV und PS3 zum 42. Kabel verlaufen durch das ganze Zimmer und werden auch z.T. geknickt, dennoch keine Probleme bei der Übertragung.
-
Andreas
> 24 hour- keinerlei Schirmung somit andauernd Verbindungsprobleme.
-
yun jing
> 24 hourFollow the directions and it will work well. You cant just snag a Wi-Fi signal out of cyber space. You must first sync the Range Extender to a Wi-Fi router which means you have to gain access to the router.
-
PATRICIA
> 24 hourDid exactly as specified, extended our routers range by at least another 50 feet as it now reaches my shop. No slow down in speed either. Highly recommended!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.