Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
E P
> 3 dayI loooove this product. I have been routinely using Arctic Silver thermal paste thought my years as a PC hobbyist and I love it. It applies easily and works well for years at a time.
-
anonymous
24-12-2024I have been building PCs for awhile, and used whatever I could get my hands on. I recently did a new heat sink on my main system here in my studio, and used this paste. The difference between this and the other I have used is unbelievable. I have far better heat transfer, better conduction for heat reduction. HIGHLY RECOMMENDED!
-
NAME_NOT_RETURNED1111
> 3 dayYup
-
slyvester4
> 3 dayThank you. quick delivery no problems.
-
CodyandMelissa
> 3 dayIt was great paste.
-
jack
> 3 dayCame quicker than expected. Wasnt all weather and/or heat cooked into crud. Love AS5 always consistent.
-
Aiden McFarland
> 3 dayReally nice thermal paste, I recently had to repaste my cpu and this paste keeps temps low again
-
Jacob McCullar
> 3 dayWorked as intended and dropped my temps.
-
Vic L
> 3 dayExactly as advertised
-
Bernice Luettgen
> 3 dayFixed my PS4 that was overheating.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
