Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
D3
> 3 dayThe heat transfer seems to work well. Came with a spreader.
-
nsgoldberg
> 3 dayBeen using this for 15 years and I still find it to be the best paste out there.
-
Tai
> 3 dayI replaced the thermal paste in all my mining gpu’s. Temps went down 5 degrees. Great product!
-
Kai
> 3 dayWorks just like thermal paste should, no complaints.
-
Vickie Conroy Jr.
> 3 dayDoes what it says.
-
Michael Sersig
> 3 dayThe Arctic Silver thermal paste works great. It spreads on nice and is inexpensive.
-
cothealiv
> 3 dayBrought temps down about 5-7 celcius from my old crusty stuff.
-
OSCAR ALEJANDRO
> 3 dayNo trae la palita :( el precio fue más bajo, pero no trae la palita
-
Miguel ponce
> 3 dayNot overly viscose or thick at room temp. Application was easy. I used the pea in the middle method and it seems to be making good contact as my temps are lower and flux less than stock corsair aio thermal paste
-
Ed Kohl
> 3 dayMy personal opinion is that it is the best. Ive been building my own comps since 1997, and have tried other brands, but wasnt impressed or satisfied with their performance.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
