Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
viewsonik
> 3 dayIt keeps my cpu cool when I overclock it a little. the last one I bought was in 2012 on the same heat sink and cpu, never a problem with overheating. thanx
-
satisfied customer
> 3 dayGreat product.
-
christina
> 3 dayEasy to spread, as described.
-
Camryn Wyman PhD
> 3 dayCubrió satisfactoriamente mis expectativas.
-
D.Hard
Greater than one weekMore than enough. And the spreading tool is great !
-
Denise C
> 3 dayNo comment
-
charles owens
> 3 dayThe spreader tool is an extra plus!!
-
Sebastian
> 3 dayReceived quick and its as described
-
Timothy
> 3 dayDoes the job
-
JDeo
> 3 dayFor the past two years, I used this thermal paste with my Noctua fan under heavy gaming loads and have never experienced any thermal throttling or high temperatures. Much of this can be attributed to the fan, but the paste is what makes the transfer efficient so it gets full marks for that.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
