Noctua NH-D15 chromax.Black, Dual-Tower CPU Cooler (140mm, Black)

High quality CPU cooler... and quiet. Worth the price premium.

Overall a great product. May be on a expensive side, but for less than an AIO, how could you go wrong with this massive cooler. Wouldn’t recommend for someone with a smaller case. Running mine in a Corsair 4000 airflow case. Overall the install was easy but can be hard if you’re doing it in the case like I did. Cooler sits mm’s from the gpu and will not allow you to have access to the upper pcie slot. Noise level was way less than my stock cooler and noticed a drop from 65-70C to 45-60C during gaming/load. Would definitely recommend for someone who doesn’t want to get an AIO and would rather stick with an air cooler.

Great product ..just very big

Fantastic cooler for my 3900x easy to install just remember this thing is BIG

itv was delivered on time. good packaging. very easy to understand installation manual.

Wow! This huge thing works very well. Theres so much surface area from the heatsinks that you can keep the fan very quiet if you choose to. No problems at all after 2 years. Theres plenty of space for huge ram sticks and you can install them without removing the cooler.

Beast of a cooler doesnt go pass 60c

La domanda è una sola , cosa vuoi andare a dirgli ? Lunico biasimo che si poteva fare a noctua era per il colore non proprio sobrio che poteva piacere e non piacere , ma da quando è stata aggiunta la configurazione black , non si può dire più nulla su questo prodotto , perfetto in ogni suo elemento , silenziosissimo , bello da vedere , insomma il top del top .

This is the best looking Noctua cooler I’ve ever owned .and yes it’s Silent

I have been using Noctua for years and wanted to change out my Corsair AIO because the fans are horribly loud. I have a LGA1151 and the thing was pretty easy to get started. Removed my motherboard and then installed bracket. After I cleaned the CPU I attempted to mount the sink as instructed. One side screwed in flawlessly. The other side would grab then literally pop off after a few seconds. I looked inside the screw holes in the spring loaded screws and noticed there was only threads about 1/2 way in compared to the other side which had threads the entire screw. I am sure it is a manufacturing issue but with this type of tension and weight I would assume there would be more than 2 small screws holding a very heavy heat sink down. Then the threads release the heat sink make a pop like a jack in the box. I would recommend anyone purchasing to inspect inside of the barrels before installing. It costed me around 4 hours of wasted time. Unfortunately I am returning and looking for another product