Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)

(364 reviews)

Price
$10.88

Quantity
(10000 available )

Total Price
Share
1182 Ratings
989
106
39
11
37
Reviews
  • Phil J.

    Greater than one week

    Comes with everything you need for a single use application. No need to buy isopropyl alcohol, wipes or microfiber cloths separately. Instructions included.

  • Dave Campbell

    Greater than one week

    Easy to use to keep your processor from overheating

  • Adam

    > 3 day

    I bought this compound to replace the stock thermal paste in my Dell Precision 5530 laptop after having some trouble with the cooling reading recommendations that I do this. I had first tried to do so with some cheap paste I had kicking around, however this made little to no difference. With a healthy dose of skepticism, I decided to pay a little more for a premium thermal compound and figure out once and for all if there really is a difference. My testing wasnt particularly controlled, but I can say for sure, there is an appreciable difference. While idle temperatures didnt really change, I could tell from the off that the stability of my temperatures was drastically improved. Rather than seeing temperatures jumping around maybe +- 10C, I was instead seeing +-1C. I guess this indicates the effective thermal mass of the chip and its cooler was drastically increased. This was more evident with temperatures under load where, as well as the improved stability, the actual measured temperatures were significantly lower, in the region of 10-15C lower. I cant be sure if this is a measure of how good this thermal compound is, or how bad the stock / generic stuff is, but I can say this is significantly better and seems to be a quality product.

  • Taj

    03-01-2025

    This, Kryonaut, and Conductonaut are the three best TIMs you can get right now. Compared to Kryonaut, this stuff is a bit runny. It will firm up a bit after a few heat cycles and doesnt carry the risks associated with a bad Conductonaut application. Make sure that when you apply your heatsink that you do it as level as possible and torque the retention mechanism as evenly as possible. It will spread itself out and push out any air bubbles, not necessary to do the older painted surface method.

  • JLS

    Greater than one week

    I cannot give a definitive result with this product but I trust Noctua with all that they do. I went from Artic Silver 5 to Noctua NT-H2 because I replaced my Cool Master Hyper 212 EVO (CPU heat sink) fan with a new Noctua fan and of course tried this new thermal paste while I had it disassembled. I now have a drop in 13C at full load benchmarking with Prime95. If this paste is enough to get you that much cooler when air cooling, Id say that is a hug win. My old fan was making noise on its way to being replaced but I never would attribute the change in temps with the replacement fan alone.

  • Pedro Mayor

    > 3 day

    Vale lapena recibido todo ahora gracias amazon :)

  • Paolo Pellegrini

    > 3 day

    Buona e mantiene bene

  • Kevin V.

    > 3 day

    So far this stuff is pretty awesome! Granted my old thermal paste was practically dried out powder, previous to using this past I would get peak temps up to 105 degrees C (using TG Pro to monitor temps) and that was also having the Mac sit on a Zalman laptop cooler. After removing the old paste and applying the Noctua NT-H2 to both my CPU and GPUs peak temps dropped to 87 degrees C with idle temps in the 50s. It seems like a big improvement to me and my Mac also seems to be running faster. This paste was super easy to use also and wasnt messy. The directions provide dot patterns, but I chose to spread it evenly over the processors with a plastic spudger.

  • skygxxx

    > 3 day

    habe mir die Noctua Wärmeleitpaste gekauft. Die Paste selbst ansich ist ok, die Paste von Grizzly ist etwas besser beim Auftragen & von der Kühlung her.

  • rhamza

    > 3 day

    I love this product. Keeps my laptop processor and GPU cooler than stock thermal paste.

NT-H2 3.5g HeaderNT-H2 3.5g Header

NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.

nt-h2nt-h2

Next-generation performance

Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.

NA-CW1NA-CW1

Non-conductiveNon-conductive

Excellent long-term stabilityExcellent long-term stability

NT-H2 3.5g scopeNT-H2 3.5g scope

Easy to clean with included wipes

The 3.5g pack of NT-H2 includes three large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done!

Not electrically conductive, non-corroding

While some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not.

Excellent long-term stability

NT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more.

3.5g package for 3-20 applications

Sufficient for around 3-20 applications (depending on the size of the CPU or GPU, e.g. around 3 applications for large CPUs such as TR4 and around 20 for small CPUs such as LGA1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then.

nt-h1nt-h1

Easy to apply

Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!

3.5g NT-H1 3.5g NT-H1 10g NT-H2 3.5g NT-H2 10g table NA-SCW1 table
NT-H1 3.5g NT-H1 3.5g SW Edition NT-H1 10g NT-H2 3.5g NT-H2 10g NA-SCW1
Description: Renowned premium-grade thermal compound Renowned premium-grade thermal compound Renowned premium-grade thermal compound Further improved second generation thermal compound Further improved second generation thermal compound Cleaning wipes for removing thermal compound
Weight/Size: 3.5g 3.5g 10g 3.5g 10g 15x12cm
Volume: 1,4 ml 1,4 ml 4,0 ml 1,2 ml 3,6 ml -
Density: 2,49 g/cm³ 2,49 g/cm³ 2,49 g/cm³ 2.81 g/cm³ 2.81 g/cm³ -
NA-CW1 Wipes: - 3x included - 3x included 10x included 20x included
Spatula Included X X X X X

Related products

Shop
Super Lucky Shop
Super Lucky Shop
( 861 reviews )
Visit Store
Top Selling Products