Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
cothealiv
> 24 hourBrought temps down about 5-7 celcius from my old crusty stuff.
-
Andy D
> 24 hourMy PC was starting to throttle under full load. I checked the temperatures and it was hitting 90C under load - which was very concerning since I have an oversized CPU cooler.
-
Trista Nicole Eidsmoe
> 24 hourMy husband loves this stuff, hes been using it for years and building pcs his whole life. Best bang for your buck you could ask for
-
Lourdes
> 24 hourWhen you get your cooler, clean the pad off with alcohol, then apply this to cpu and then proceed as usual. Has *NEVER* failed to produce beautiful thermal transfer results.
-
Andres
> 24 hourHasta el momento ha salido muy buena, las temperaturas son muy estables.
-
Ed Kohl
> 24 hourMy personal opinion is that it is the best. Ive been building my own comps since 1997, and have tried other brands, but wasnt impressed or satisfied with their performance.
-
G. Flippo
> 24 hourItem as described. Applied easily and worked as expected.
-
Emily
> 24 hourUsed in on my ps4 pro when it started sounding like a jet engine. This stuff worked so well I thought I broke my ps4 because I had never heard it run so quietly before lol
-
Corey Burns
> 24 hourOne of the best thermal pastes around. Consistent low temps.
-
David Connolly
> 24 hourgood value for artic silver
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
