WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
A MAN
> 3 dayWunderbare Kabel. Tun was sie sollen und sind sehr schnell. kommen locker mit meiner 100Mbit/s leitung klar .
-
O.F.
> 3 dayTja was soll man sagen. Kann man bei so einem Kabel etwas falsch machen? Ich denke nicht...
-
Rabs
> 3 dayDie Kabel sind meiner Meinung nach eine gute Anschaffung, sie sind lang genug, halten bis jetzt obwohl sie viel bewegt werden und man bricht sich auch nicht die Finger (wie bei manch einem anderen Netzwerkkabel) wenn man sie aus der Dose entfernen will. Preis-Leistung mehr als gut.
-
LutzVanDenPutz
> 3 dayIch verwende diese Kabel seit längerer Zeit. Neuerdings sind sie allerdings deutlich dünner und biegsamer geworden. Ich habe keine Ahnung ob das Einfluss auf die Qualität hat, es fühlt sich aber deutlich unwertiger (um nicht zu schreiben billiger) an.
-
Grigory Gofman
> 3 dayVery impressed with it. My new extender would connect to my router, everything seem to work. Im very happy with the extender and the tech support.
-
Hans-Christian Klein
> 3 dayKable kann gut aufgerollt werden; leicht steckbar;Farben gut kombiniert; Länge reichlich. bin ingesamt sehr zufrieden; kann das kabel weiter empfehlen
-
PATRICIA
Greater than one weekEasy setup and boosted my wifi connection 100% in dead-spots and everywhere else throughout.great purchase, 100% functional.........I got a excellent product......A+++
-
MARGARET
> 3 dayExcellent product. I am getting wifi in all the dead zones now in my home. Great buy for $20.Works perfectly so far! Easy as 1,2,3! Great technology. No stress at all.
-
KEITH
Greater than one weekFixed the WiFi dead spot in my house. I get a strong signal everywhere now. Really easy to set up. I tried it from a couple of spots before I found the sweet spot. Highly recommended.
-
SANDRA
> 3 dayThis is one handy device. I wanted to use my laptop while sitting on the porch, but the wifi we had just didnt reach out there. This little baby makes it all possible. Easy to setup/install. Works great.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
