WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARGARET
Greater than one weekIf you have WiFi range issues in your house then this device works well to fill in the gaps. It has easy setup and configuration and supports all the standard features you would expect from todays Access Points.
-
Sebastian W.
> 3 dayJA was soll man zu den Artikel schon sagen, erstmal schnelle Lieferung wie von Amazon gewohnt.
-
CHRISTINE
> 3 dayI needed to get relay from the equipment in the cellar to the top (third) floor - set up the unit on the first floor and it works very well. Very easy to do.
-
SANDRA
Greater than one weekVery easy set up and really great for dead spots in your home/apt. Looks very cool as well.Easy set up and good to go in nothing flat! Very pleased and I recommend.
-
CHRISTINE
> 3 dayTrivial to setup if your router supports WPS. It did get stupid once so I had to unplug it and plug it back in but thats just typical of any consumer grade networking product.
-
SANDRA
> 3 dayMy router is in the living room and wifi would be super spotty in the bedroom but with this range extender it is working very great . Setup was very pretty easy. Well see how it goes. pretty easy setup and works great. According to a speed test, quadrupled the download speed, and it seems it. Was getting drops and erratic wifi from the existing router. This unit is halfway between the two and after two months, hasnt dropped yet.
-
MARGARET
Greater than one weekAfter trying a more expensive different brand and not being able to get it to work, I tried this one. Took me 2 minutes and it was ready to go! Works great!!
-
JEREMY
Greater than one weekThis works great, has expanded my range to every part of my house and a good part of my yard.Am using this in conjunction with a new router and the system works great.
-
Hose
> 3 dayAlles i.O. Kann ich empfehlen, es gibt nichts daran auszusetzern. Funktioniert einwandfrei. Gute Qualität.Alles i.O. Kann ich empfehlen, es gibt nichts daran auszusetzern. Funktioniert einwandfrei. Gute Qualität.
-
tyskalio
> 3 dayUnschlagbares Preis-Leistungsverhältnis.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
