WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARY
Greater than one weekWorks great and solves the problem of range in a two story house.Works great and solves the problem of range in a two story house.
-
Ullmann
> 3 daykabel funktioniert wie erwartet.
-
CHRISTINE
> 3 dayBoth speeds are now available to the other side of our house. Our router is located at one end of the building and I placed the extender in the middle of our place (having to go through a long hallway and 3 walls). Now the other side gets wifi at a good speed too! So happy!
-
JOYCE
> 3 daySolved a networking problem that had existed for years at my brothers farmhouse. Won me points with my sister-in-law! Great! It was simple to set up and extends our wi-fi out to our deck.
-
MARY
> 3 dayI am super happy with this extender so far. It is easy to set up and works great anywhere in my house and it is not big and ugly.
-
klinhgf
> 3 dayVery easy setup, even despite my router not having the WPS button. Its been running smoothly ever since and we now happily have wifi out on our backyard patio (device located safely indoors of course).
-
JEREMY
> 3 daypretty easy setup with my tablet browser. Very best range. I can even connect to my network from the backyard which is on the opposite side of the house from my router. Its a definite buy. Love this product! Had a dead spot in my room, got this product and it works awesome. Set up is pretty easy, steps are explained in the book awesome. Love it!
-
ALBERT
Greater than one weekI live in a large two story house and one corner of the house has always had a poor wi-fi signal but not anymore. I placed the device upstairs in that corner of the house and now consistently get 5 bars in that corner. The set up was easy and quick, just follow the directions.
-
KEITH
> 3 dayProduct works great. I had no issues with installation. It took less than five minutes to get it up and running. I would highly recommend this product to anyone who has range issues in their home.
-
LeThi Oelsner
> 3 dayFür das Preisleistungsverhältnis ein super Kabel. Funktioniert 1a, habe nichts auszusetzen.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
